Piecing Together Prehistoric Life: Scanning and Articulating Gorgosaurus

Autores/as

  • Manisha Saraswat WISEST student researcher, University of Alberta
  • Samantha M. Hamilton Department of Biological Sciences, University of Alberta
  • Nicole Jaremco WISEST student researcher, University of Alberta
  • Howard Gibbins Department Biological Sciences, University of Alberta
  • Clive Coy Department Biological Sciences, University of Alberta
  • Phil Currie Department Biological Sciences, University of Alberta

DOI:

https://doi.org/10.29173/aar68

Palabras clave:

scanning, articulating, prehistoric life, gorgosaurus, skulls, dinosours, dinosaurs provincial park, dinosaur skull bones, fossils, WISEST

Resumen

The Skull bones of a Gorgosaurus Libratus was laser scanned in order to articulate the model into software and 3D print. The model had to be articulated due to some missing bone, making it unrealistic to put together. Using the scanned pieces we articulated the model making a skull of The Gorgosaurus Libratus. This detailed computer skull can be sent anywhere in the world, for anyone to study. These scans could also be used to find out how the Gorgosaurus Libratus bit down or determine the way these animals moved. Prior to laser scanning, a method known as Photogrammetry was used. This method involves taking photos of the model and processing the images on a computer, which slow down the process. Another way used to replicate bones was by making silicone molds. This could damage the bone which makes it a method used less often. Laser scanning is the fastest and safest method in order to scan a bone. After the bones were articulated on the computer they were sent to a 3D printer. Unfortunately, the printer beds could not hold the massive skull. Due to this, the bones were printed half size. In order to 3D print, the holes of the model had to be filled using another program. The holes were caused by the light of the laser scanner not being able to go into all the holes creating shadows that the laser scanner could not pick up. However, after the holes were filled some of the objects were still too big to fit on the printer bed. Therefore, some of the objects were cut in half to fit. The 3D printed models were then printed and assembled.

Publicado

2019-09-21